Camping and Motorhome Accessories

This joiner is for connecting two hoses where a 90-degree angle is needed.
It comes with 2 male ends.

This vapour cylinder is designed to replace the usual exchangeable propane bottles used by campers, caravaners and motor-home (RV) users. It has the advantage that you can refill it at any LPG filling station. Other features include:
11.6 litre gas capacity
level guage to show how much gas is left
automatic fill stop at 80% (required for all LPG containers)
easily transferred to another vehicle
can be fitted with a remote filler
manufactured to EN1442 standard
CE/TPED approved and PI-marked.

Height 470mm
Width 245mm

This vapour cylinder is designed to replace the usual exchangeable propane bottles used by campers, caravaners and motor-home (RV) users. It has the advantage that you can refill it at any LPG filling station. Other features include:
21 litre gas capacity
level guage to show how much gas is left
automatic fill stop at 80% (required for all LPG containers)
easily transferred to another vehicle
can be fitted with a remote filler
manufactured to EN1442 standard
CE/TPED approved and PI-marked.

Height 550mm
Width 300mm

This vapour cylinder is designed to replace the usual exchangeable propane bottles used by campers, caravaners and motor-home users. It has the advantage that you can refill it at any LPG filling station. Other features include:
21 litre gas capacity (27 litres gross)
level guage to show how much gas is left
automatic fill stop at 80% (required for all LPG containers)
pressure relief valve
conforms to EN1442 standard
easily transferred to another vehicle
can be fitted with a remote filler

Overall height is 580mm, diameter is 300mm.

This vapour cylinder is designed to replace the usual exchangeable propane bottles used by campers, caravaners and motor-home users. It has the advantage that you can refill it at any LPG filling station. Other features include:
28.8 litre gas capacity (36 litres gross)
level guage to show how much gas is left
automatic fill stop at 80% (required for all LPG containers)
pressure relief valve
conforms to EN1442 standard
easily transferred to another vehicle
can be fitted with a remote filler

Overall height is 730mm, diameter is 300mm.

This kit may be used to install one of the vertical, 4-hole camping cylinders. It comprises the following items:-
a straight, UK bayonet filler with housing,
a 1 metre flexible filler hose,
a camping pressure regulator (30 mbar) with 8mm compression fitting
a 4-hole level sender,
and a level indicator.

These tanks come with a set of 4 valves and a gas-tight box, and are designed to operate with the valves at 110 degrees down from the vertical.

Select the size you need from the drop-down list.
Sizes shown are the diameter and length in millimetres, and the gross capacity in litres.
LPG capacity is 80% of the gross capacity.

If the tank is installed inside a vehicle, it will need vent hoses (sold separately).

The tanks must be securely mounted. A tank frame (sold separately) would make the job easier.

We can supply fitting kits for these tanks that include a filler, pipe and regulator (as described separately on this page.

This kit may be used to install one of the horizontal, 4-hole vapour tanks. It comprises the following items:-
a straight, UK bayonet filler with housing,
a 1 metre flexible filler hose,
a camping pressure regulator (30 mbar) with 8mm compression fitting
a 4-hole level sender,
a level indicator,
and a tank mounting frame (size must match the tank) with 3 straps.

We stock frames for mounting a wide range of cylinder tanks - each designed to fit a given size of tank.
The frames come with straps and fasteners to secure the tank to the frame, and buffers to fit between them to prevent abrasion.

The number of straps will vary depending on the size of tank.

If you intend to suspend a tank, it must be secured by at least 3 straps. In some instances this means that you will need to purchase and install additional straps.

These straps are designed to secure cylinder tanks and are made from plastic-coated steel. They come with buckles and bolts as shown in the photo.
The straps are approximately 1.2 m long and 32 mm wide.
Any tank that is suspended from a vehicle must have at least 3 straps.
The number of straps required for a tank will depend on the size of tank.

These brackets are an easier fitting alternative to the heavy duty straps. They are designed to secure any 360mm diameter tank.
Any tank that is suspended from a vehicle must have at least 3 brackets.

This product comprises a level sender for a 4-hole tank and a level display in the form of 4 green LEDs and 1 red LED indicating reserve.

This is a 37 mbar regulator with 8mm copper pipe inlet and outlet.

This is a 30 mbar regulator with connector for direct attachment to a 4-hole vapour tank and an 8mm copper pipe outlet.

This is a 30 mbar regulator with connector for direct attachment to a 4-hole vapour tank and a hosetail outlet.

Standard UK-type filler with a straight neck. This is supplied without housing or cap. The screw thread is for a JIC filler hose.

Standard UK-type filler with a 90 degree neck. This is supplied without housing or cap. The screw thread is for a JIC filler hose.

70mm diameter recessed housing for bayonet filler.

This can be used with any of our UK bayonet fillers.

After years of teritorial use of the bayonet filler, the cup filler and the Acme filler, the industry has finally come up with a common design to be used throughout Europe - eventually. Gradually, over the coming years, the Euro LPG filler will find its way into filling stations across Europe. This adaptor has a 22mm thread for screwing into the centre of the standard UK bayonet filler.
Spain is the most recent country to join the LPG market and consequently the first to adopt this standard.

Acme to bayonet filler adaptor - those with an Acme screw filler can use this to fill up in the UK, Holland and Norway

The Acme screw-type filler is often found on American motor homes.

Acme to cup filler adaptor - those with an Acme screw filler can use this to fill up in France, Italy, Austria, Sweden, Portugal, Greece and many eastern European countries

Cup-type filler adaptor - for use when visiting France, Italy, Austria, Sweden, Portugal, Greece and many eastern European countries

Some Swiss filling stations use this type too.
The adaptor has a 22mm thread.

Acme-type filler adaptor - for use when visiting Ireland, USA, Belgium, Germany, Luxembourg

Some Swiss filling stations use this type too.
The adaptor has a 22mm thread.

This gate valve has quarter inch BSP inlet and outlet connectors and is used to turn off/on LPG flow.

These clips are for the 20 mm JIC hose.
Allow 1 clip per 50 cm (max) of pipe.
Sold in packs of 5.

This T piece is for joining 3 JIC hoses, when installing 2 tanks.
It comes with 3 male ends.

This T piece is for joining 2 JIC hoses to a filler or straight joiner, when installing 2 tanks.
It comes with 2 male ends and 1 female.

This joiner is for connecting a hose to a filler or straight joiner, where a 90-degree angle is needed.
It comes with 1 male end and 1 female end.

These JIC hoses can be used to fill LPG tanks and are useful for filling large tanks (say, over 100 litres) as they reduce filling time. They screw directly onto 4-hole tanks and fillers that are not designed for 8mm copper pipe. If you want to connect to a multivalve, you will need an adaptor (sold separately).

These hoses have a straight connector at one end and a 90 degree connector at the other and come in different lengths.

These JIC hoses can be used to fill LPG tanks and are useful for filling large tanks (say, over 100 litres) as they reduce filling time. They screw directly onto 4-hole tanks and fillers that are not designed for 8mm copper pipe. If you want to connect to a multivalve, you will need an adaptor (sold separately).

These hoses have straight connectors at both ends and come in different lengths.

This is high pressure, 8mm, LPG vapour hose for use in domestic/camper installations. BS3212/2.

It is not for use in running engines.

The hose is sold by the metre. So, make sure you order the right length.

Test point for domestic (vapour) system with 8mm compression fittings.