Discovery 2/2A with Replacement Petrol Tank

This kit comprises all of the components you will need to convert a Discovery 2 or 2A to LPG and includes a replacement petrol tank (36 litres) and two single-hole, 40-litre, LPG cylinder tanks.

The Bigas Sequential Gas Injection System front-end kit comprises:
Gas ECU and wiring looms
Gas injector rail(s), nozzles and hoses
Pressure sensor
Reducer/vapouriser
Changeover switch and level indicator
LPG filter and shut-off valve
Vapour filter
Water Ts, hose and clips
Vapour hose and clips
Plastic-coated copper pipe and clips.

For the back-end we supply:
UK filler
Copper fill pipe
Two 40-litre LPG tanks with multivalves
Mounting cradle/skid designed for the Discovery 2/2A, mounts to the original petrol tank mounting points
LPG level sender
Replacement petrol tank (36 litres) with roll-over valve
Installation Guide
Software on request

You will need a laptop PC for the simple set-up procedure, and a lead (optional extra) to connect to the SGIS.

The standard petrol injector looms come with solder connections. Plug-in type connector looms are available as an optional extra.

This kit comprises all of the components you will need to convert a Discovery 2 or 2A to LPG and includes a replacement petrol tank (36 litres) and a 4-hole, ellipsoidal LPG tank (80 litres).

The Bigas Sequential Gas Injection System front-end kit comprises:
Gas ECU and wiring looms
Gas injector rail(s), nozzles and hoses
Pressure sensor
Reducer/vapouriser
Changeover switch and level indicator
LPG filter and shut-off valve
Vapour filter
Water Ts, hose and clips
Vapour hose and clips
Plastic-coated copper pipe and clips.

For the back-end we supply:
UK filler
JIC fill hose
Ellipsoidal tank (80 litres) with 4-hole valves
Mounting kit
LPG level sender
Replacement petrol tank (36 litres) with roll-over valve
Installation Guide
Software on request

You will need a laptop PC for the simple set-up procedure, and a lead (optional extra) to connect to the SGIS.

The standard petrol injector looms come with solder connections. Plug-in type connector looms are available as an optional extra.

You will need a laptop PC for the simple set-up procedure.
This serial lead is required to connect the SGIS to the PC.
If your PC does not have a serial port, you will also need a USB adaptor.

Special offer - lead is included with most SGIS full vehicle conversion kits

You will need a laptop PC for the simple set-up procedure, and a serial lead to connect to the lambda control system.

If your PC does not have a serial port, you will also need this USB adaptor.
Suitable for Windows 98, ME, 2000, XP and Vista).