Filter/shut-off valves and filter elements

This LPG vapour filter is fitted between the reducer/vaporiser and the gas injector rail on an SGIS.
It should be changed about every 12,000 miles.

This filter has 10mm ends and is also suitable for Zavoli sequential injection systems.
(Depending on stock levels, we may supply a non-Bigas make that is compatible.)

This vapour filter is fitted between the reducer/vaporiser and the gas injector rail on an SGIS.
It should be changed about every 12,000 miles.

This filter has 12mm ends.

Max diameter 45.8mm
Length 74.6mm

This vapour filter is fitted between the reducer/vaporiser and the gas injector rail on an SGIS.
It should be changed about every 12,000 miles.

This filter has 16mm ends.

This vapour filter is fitted between the reducer/vaporiser and the gas injectors on a gas injection system.
It should be changed about every 12,000 miles.

This filter has a 16mm inlet and 4 x 8mm outlets and is suitable for engines up to 2 litres.

Many Ford, Vauxhall and LDV factory-fitted systems use this type of filter - check compatibilty before ordering.

This LPG vapour filter is fitted between the reducer/vaporiser and the gas injector rail on a BRC system.
It should be changed about every 12,000 miles.

This vapour filter element should be changed about every 12,000 miles.

Max diameter 42mm
Height 57mm

This vapour filter has an exchangeable element inside.
It is designed to fit in a 12 mm vapour line between the vaporiser and injector rail.

This vapour filter element should be changed about every 12,000 miles.

Max diameter 42mm
Height 52mm

This petrol shut-off valve has an electric solenoid to switch the petrol flow on and off and is intended for use on carburetted engines. The valve opens when powered and also has a manual override to open the valve.

This petrol shut-off valve has an electric solenoid to switch the petrol flow on and off and is intended for use on carburetted engines. The valve opens when powered. (There is no manual override to open the valve.) This valve should be used where a high petrol flow rate is required.

This comes with 6mm inlet and outlet compression fittings.

If you need 8mm, you will need 2 x 6mm-8mm adaptors.

This liquid-phase filter element should be changed about every 12,000 miles.
There are 2 filters in the pack.

This liquid-phase filter element should be changed about every 12,000 miles.
There are 2 filters in the pack.

Max diameter 37.6mm
Height 27.6mm

This liquid-phase filter element should be changed about every 12,000 miles.
There are 2 filters in the pack.
Fits most Vauxhall factory-fitted LPG systems.

Max diameter 43.3mm
Height 23.7mm

This comes with 6mm inlet and outlet compression fittings.

If you need 8mm, you will need 2 x 6mm-8mm adaptors.

This liquid-phase filter element should be changed about every 12,000 miles.
There are 2 filters in the pack.

Max diameter 25mm
Height 26mm

This liquid-phase filter element should be changed about every 12,000 miles.
There are 2 filters in the pack.

Max diameter 20.5mm
Height 19.2mm

This filter element should be changed about every 12,000 miles.
There are 2 filters in the pack.

Max diameter 34mm
Height 46.1mm

This comes with 6mm inlet and outlet compression fittings.

If you need 8mm, you will need 2 x 6mm-8mm adaptors.

This liquid-phase filter element should be changed about every 12,000 miles.
There are 2 filters in the pack.

Suitable for both type 01 and type 07 Valtek filter/shut-off valves.

Max diameter 30.7mm
Height 20.6mm

High capacity Valtek type 07 filter/shut-off valve with M12/8mm inlet and M12 male outlet for direct connection to a vaporiser (providing it has an M12 inlet).

No mounting bracket supplied.