JIC Hoses, Clips and Fittings

These JIC hoses can be used to fill LPG tanks and are useful for filling large tanks (say, over 100 litres) as they reduce filling time. They screw directly onto 4-hole tanks and fillers that are not designed for 8mm copper pipe. If you want to connect to a multivalve, you will need an adaptor (sold separately).

These hoses have a straight connector at one end and a 90 degree connector at the other and come in different lengths.

These JIC hoses can be used to fill LPG tanks and are useful for filling large tanks (say, over 100 litres) as they reduce filling time. They screw directly onto 4-hole tanks and fillers that are not designed for 8mm copper pipe. If you want to connect to a multivalve, you will need an adaptor (sold separately).

These hoses have straight connectors at both ends and come in different lengths.

These clips are for the 20 mm JIC hose.
Allow 1 clip per 50 cm (max) of pipe.
Sold in packs of 5.

This T piece is for joining 3 JIC hoses, when installing 2 tanks.
It comes with 3 male ends.

This T piece is for joining 2 JIC hoses to a filler or straight joiner, when installing 2 tanks.
It comes with 2 male ends and 1 female.

This joiner is for connecting a hose to a filler or straight joiner, where a 90-degree angle is needed.
It comes with 1 male end and 1 female end.

This adapter allows a JIC hose to be connected to a multivalve.
It is not suitable for use with gas-tight boxes - they don't fit.