Poly Pipe, Clips and Fittings

This is a light and flexible alternative to the standard 6 mm plastic-coated copper pipe.
The internal diameter is actually 3/16", giving it about 50% greater cross-section.
The pipe is sold by the metre. So, make sure you order the right length.
You will also need a connector for each end of a length of pipe
and a number of pipe clips (allow 1 clip per 30 cm of pipe). Both items are sold separately.

These clips are for the 6 mm size (3/16" internal diameter) Polyfelx pipe.
Allow 1 clip per 30 cm of pipe.
Sold in packs of 10.

This is a light and flexible alternative to the standard 8 mm plastic-coated copper pipe.
The internal diameter is actually 1/4", giving it about 12% greater cross-section.
The pipe is sold by the metre. So, make sure you order the right length.
You will also need a connector for each end of a length of pipe
and a number of pipe clips (allow 1 clip per 30 cm of pipe). Both items are sold separately.

These clips are for the 8 mm size (1/4" internal diameter) Poly pipe.
Allow 1 clip per 30 cm of pipe.
Sold in packs of 10.

This fitting facilitates the connection of the (6 mm size) 3/16" Faro Poly pipe to a 6 mm standard compression joint.
Sold individually - allow one per end.

This fitting facilitates the connection of the (8 mm size) 1/4" Faro Poly pipe to an 8 mm standard compression joint.
Sold individually - allow one per end.

This fitting facilitates the connection of the (6 mm size) 3/16" Faro poly pipe to a standard 4-hole tank outlet valve.
Sold individually.

This fitting facilitates the connection of the (8 mm size) 1/4" Faro poly pipe to a standard 4-hole tank outlet valve.
Sold individually.

This fitting facilitates the connection of the (6 mm size) 3/16" Faro poly pipe to a standard M10 multivalve, filter/shut-off valve or reducer.
Sold individually.

This fitting facilitates the connection of the (8 mm size) 1/4" Faro poly pipe to a standard M10 multivalve, filter/shut-off valve or reducer.
Sold individually.

This fitting facilitates the connection of the (8 mm size) 1/4" Faro poly pipe to a standard M12 thread found on fillers that have an outlet for 8mm copper pipe (without an adapter).
Sold individually.

This fitting facilitates the connection of the (6 mm size) 3/16" Faro poly pipe to a standard M10 multivalve, filter/shut-off valve or reducer, at an angle of 90 degrees.
Sold individually.

This fitting facilitates the connection of the (8 mm size) 1/4" Faro poly pipe to a standard M10 multivalve, filter/shut-off valve or reducer, at an angle of 90 degrees.
Sold individually.

This fitting facilitates the connection of the (8 mm size) 1/4" Faro poly pipe to a standard 8mm compression fitting, at an angle of 90 degrees.
Sold individually.

This fitting facilitates the connection of the (6 mm size) 3/16" Faro poly pipe to a standard 6mm compression fitting, at an angle of 90 degrees.
Sold individually.

This fitting facilitates the connection of the (8 mm size) 1/4" Faro poly pipe to a standard 6mm compression fitting, at an angle of 90 degrees.
Sold individually.

This fitting facilitates the connection of the (8 mm size) 1/4" Faro poly pipe to a standard 8mm compression fitting, at an angle of 90 degrees.
Sold individually.