Tank Straps, Brackets and Frames

This bracket is used to secure a Stako toroidal tank to a vehicle and to provide light protection for the pipes and cables that feed from the centre of the tank.

These brackets are an easier fitting alternative to the heavy duty straps. They are designed to secure any 244mm diameter tank and are most often used for sill tanks.
Any tank that is suspended from a vehicle must have at least 3 brackets.

These brackets are an easier fitting alternative to the heavy duty straps. They are designed to secure any 360mm diameter tank.
Any tank that is suspended from a vehicle must have at least 3 brackets.

These straps are designed to secure cylinder tanks and are made from plastic-coated steel. They come with buckles and bolts as shown in the photo.
The straps are approximately 1.2 m long and 32 mm wide.
Any tank that is suspended from a vehicle must have at least 3 straps.
The number of straps required for a tank will depend on the size of tank.

These straps are designed to secure cylinder tanks and are made from plastic-coated steel. They come with buckles and bolts as shown in the photo.
The straps are approximately 1.5 m long and 50 mm wide.
Any tank that is suspended from a vehicle must have at least 3 straps.
The number of straps required for a tank will depend on the size of tank.

We stock frames for mounting a wide range of cylinder tanks - each designed to fit a given size of tank.
The frames come with straps and fasteners to secure the tank to the frame, and buffers to fit between them to prevent abrasion.

The number of straps will vary depending on the size of tank.

If you intend to suspend a tank, it must be secured by at least 3 straps. In some instances this means that you will need to purchase and install additional straps.

We stock frames for mounting a wide range of cylinder tanks - each designed to fit a given size of tank.
The frames come with straps and fasteners to secure the tank to the frame, and buffers to fit between them to prevent abrasion.

The number of straps will vary depending on the size of tank.

If you intend to suspend a tank, it must be secured by at least 3 straps. In some instances this means that you will need to purchase and install additional straps.

We stock frames for mounting a wide range of cylinder tanks - each designed to fit a given size of tank.
The frames come with straps and fasteners to secure the tank to the frame, and buffers to fit between them to prevent abrasion.

The number of straps will vary depending on the size of tank.

If you intend to suspend a tank, it must be secured by at least 3 straps. In some instances this means that you will need to purchase and install additional straps.

The bar is designed to be used between wheel arches to secure a cylinder tank. The telescopic bar is bolted to the vehicle through the ends of the bar and the tank is strapped to the bar using 2 or more heavy-duty straps (sold separately). The mounted tank must be able to withstand 20g in the direction of travel. So, make sure that the points where the bar is secured are strong enough.