Tanks - single-hole

Single-hole cylinder tank - select the size you need from the products below.
Sizes shown are the diameter and length in millimetres, and the gross capacity in litres.
LPG capacity is 80% of the gross capacity.

You will need a multivalve (sold separately) for one of these tanks.
If the tank is installed inside a vehicle, it will need a gas-tight box and vent hoses (sold separately).
The tanks must be securely mounted. A tank frame (sold separately) would make the job easier.

Single-hole Toroidal Tank - select the size you need from the products below.

Sizes shown are the diameter and height in millimetres, and the gross capacity in litres.
LPG capacity is 80% of the gross capacity.

You will need a multivalve (sold separately) for one of these tanks. The valve is mounted at 30 degrees, in the centre of the tank, beneath the gas-tight-cover.

The tanks must be securely mounted. These tanks are bolted through the centre hole in the tank and are therefore not suitable for fitting in plastic spare-wheel wells.

These tanks are our Samcelik economy range, with some different sizes that might be just what you need.

Single-hole Full-Toroidal Tank - select the size you need from the products below.

Sizes shown are the diameter and height in millimetres, and the gross capacity in litres.
LPG capacity is 80% of the gross capacity.

You will need a multivalve (sold separately) for one of these tanks. The valve is mounted at 0 degrees, on the outside lower edge of the tank.

If the tank is installed inside a vehicle, it can be mounted so that the valve is either inside or outside the vehicle. If the valve is outside the vehicle make sure that the hole, through which it passes, is sealed and weather tight. If the valve is inside the vehicle it will need a soft gas-tight box, vent hoses and an Emer multivalve (sold separately).

The tanks must be securely mounted.

Single-hole Full-Toroidal Tank - select the size you need from the drop-down list.

Sizes shown are the diameter and height in millimetres, and the gross capacity in litres.
LPG capacity is 80% of the gross capacity.

You will need a multivalve (sold separately) for one of these tanks. The valve is mounted at 25 degrees, on the outside top edge of the tank (similar position to a 4-hole valve set).

You will need a soft gas-tight box, vent hoses and a 25 degree Emer multivalve (sold separately).

The tanks must be securely mounted.

Single-hole, Vertical Toroidal Tank with multivalve, level sender and vent hose.

Sizes shown are the diameter and width in millimetres, and the gross capacity in litres.
LPG capacity is 80% of the gross capacity.

The tank must be securely mounted vertically, and is secured using the articulated bolts at the base of the tank.

Fits GZWM and Stako toroidal tanks.

Fits GZWM and Stako toroidal tanks.